If you have wireless issues connecting your OBDLink® MX+ or OBDLink LX adapter to your phone or tablet, try the steps in this article to resolve the problem. 

  1. Perform a factory reset on the adapter by holding the button (highlighted below) for 15 seconds or until the green POWER LED flashes rapidly.
    When factory settings have been restored, the green POWER LED will turn solid.

    OBDLink MX+OBDLink LX
    OBDLink MX+ adapter with a red arrow pointing to the button.OBDLink LX adapter with a red arrow pointing to the button.


  2. Remove your OBDLink adapter from your phone’s Settings > Bluetooth menu (if present). 
  3. Press the button again and make sure the BT LED is flashing rapidly. 
  4. Pair your adapter to your phone or tablet using the Connection Wizard in the OBDLink app by tapping Settings > Set Up New Adapter.


Troubleshooting

If your adapter won’t complete a factory reset, then it may be missing firmware. Follow the steps in this article: Update OBDLink Adapter Firmware in the section Device recovery when OBDLink app has been reinstalled


Learn more

You can explore other OBDLink features and functionality using our support article knowledge base.

For descriptions of terms used in this article, see the Glossary of Acronyms and Terms.


Need more help?

OBDLink Support Forum 

Submit a Support Ticket



OBDLink® is a registered trademark of OBD Solutions, LLC.